Fagor post processor

This is the actual opening and closing of a program Takshak posted for Fagor — 105 lines in full. It is the same output our test suite checks on every build, not a sample written for this page.

; Takshak v1.0 -- golden_core
; WCS origin (part-local): X=-10.000 Y=-20.000 Z=0.000
; Tool table:
;   T1 = D6mm  6mm Face Mill  [auto-numbered]
;   T5 = D4mm  4mm 2F Flat
;   T2 = D8mm  [auto-numbered]
; INFO: [auto-numbered] tools carry no tool number in the Tool Library -- T assigned by first use; match them to the machine before running
G54 G17 G71 G90 G94 G40 G49
G0 Z30.

M8
; warm up spindle

; Tool change: T1 = D6mm  6mm Face Mill
T1 M6
; INFO: no length register for T1 -- length comp CANCELLED (G49); touch off before run
G49
; -- face --

... 82 lines of cutting moves ...

G0 Z30.
G49
G0 X0. Y0.
M30

The program frame — how the file opens, how tools are called, how it ends — is what differs between controls, so that is what you can see here. The cutting moves in between are the part.

Two built-in posts, not a setting you have to remember: pick Fagor - mm or Fagor - Inch in the export dialog and the whole dialect follows, feed words included.

The Fagor post targets the common dialect rather than one specific machine. If your control wants something slightly different, duplicate any built-in post and edit the copy — it inherits from the original and stores only your changes, so the shipped post stays intact and updates cannot overwrite your version.

Send us a short G-code sample your machine is happy with and we will tell you straight whether it matches or what would need changing: support@takshakcam.com.

The post is the last step. Before it, Takshak reads your solid, finds the machinable features, and gives you a full 3-axis operation library plus 4-axis rotary — see what it does. It runs on Windows and Linux, entirely on your own machine, and it is a one-time perpetual license, not a subscription.

Pricing