Post processors
18 controls, built in and ready to use — 17 of them shipped in inch as well as millimetres, which is 35 posts in all. Pick your control below and see the actual G-code Takshak writes for it before you buy anything.
Every post here is built in and locked, so an update cannot break it. If your machine wants something slightly different, duplicate one and edit the copy — it inherits from the original and stores only your changes.
- LinuxCNC LinuxCNC RS274NGC (the ISO reference base)
- Fanuc - Generic Generic Fanuc 0i/30i (ISO). LinuxCNC + program wrapper.
- GRBL GRBL / grblHAL (RS274 subset: no G43/G49, G40-42, G93)
- Haas Haas classic + NGC (ISO). Fanuc + G154P offsets, G187, G53 retract.
- Mazak Mazak EIA/ISO (Smooth/Matrix)
- Doosan Doosan / DN Solutions (Fanuc control)
- Brother Speedio Brother Speedio (Fanuc-based, HSM)
- Mitsubishi Mitsubishi Meldas / M8 (Fanuc-like)
- Fadal Fadal Format 2 (decimal; Format 1 pending)
- Mach3 / Mach4 Mach3 / Mach4 (RS274NGC)
- Masso Masso G3 (standalone, up to 5-axis)
- Centroid Centroid Acorn/Oak (CNC12)
- Siemens 840D Siemens 840D/828D (ISO/G-code mode, generic 3-axis)
- Heidenhain TNC Heidenhain TNC 640/530 (Klartext, bespoke emitter)
- Okuma OSP Okuma OSP-P300 (G15 Hxx work offsets)
- Fagor Fagor 8065 (ISO mode)
- Hurco Hurco WinMax (ISO/NC mode)
- Tormach Tormach PathPilot (LinuxCNC-based)
Not listed?
Send a short G-code sample your machine is happy with to support@takshakcam.com and we will tell you straight whether one of these already matches it, or what would need changing. Most controls are closer to one of the above than their badge suggests.