Fanuc - Generic post processor

This is the actual opening and closing of a program Takshak posted for Fanuc - Generic — 108 lines in full. It is the same output our test suite checks on every build, not a sample written for this page.

%
O0001
( Takshak v1.0 -- golden_core )
( WCS origin [part-local]: X=-10.000 Y=-20.000 Z=0.000 )
( Tool table: )
(   T1 = D6mm  6mm Face Mill  [auto-numbered] )
(   T5 = D4mm  4mm 2F Flat )
(   T2 = D8mm  [auto-numbered] )
( INFO: [auto-numbered] tools carry no tool number in the Tool Library -- T assigned by first use; match them to the machine before running )
G54 G17 G21 G90 G94 G40 G49 G80
G0 Z30.

M8
( warm up spindle )

( Tool change: T1 = D6mm  6mm Face Mill )
T1 M6
( INFO: no length register for T1 -- length comp CANCELLED [G49]; touch off before run )

... 85 lines of cutting moves ...
G0 Z30.
G49
G0 X0. Y0.
M30
%

The program frame — how the file opens, how tools are called, how it ends — is what differs between controls, so that is what you can see here. The cutting moves in between are the part.

Two built-in posts, not a setting you have to remember: pick Fanuc - Generic - mm or Fanuc - Generic - Inch in the export dialog and the whole dialect follows, feed words included.

The Fanuc - Generic post targets the common dialect rather than one specific machine. If your control wants something slightly different, duplicate any built-in post and edit the copy — it inherits from the original and stores only your changes, so the shipped post stays intact and updates cannot overwrite your version.

Send us a short G-code sample your machine is happy with and we will tell you straight whether it matches or what would need changing: support@takshakcam.com.

The post is the last step. Before it, Takshak reads your solid, finds the machinable features, and gives you a full 3-axis operation library plus 4-axis rotary — see what it does. It runs on Windows and Linux, entirely on your own machine, and it is a one-time perpetual license, not a subscription.

Pricing